Of all the stations of the Via Dolorosa, this is the one that insists on the body — on weight, on exhaustion, on a man who cannot carry what he has been given to carry. Gustave Doré’s engraving crowds the frame with onlookers; Amnon’s carved wood interpretation, two and a half meters wide, lets the wood itself register the strain. The 24 karat gold and gold metallic leaves fall where the composition needs light, and leave the rest to the grain and the shadow.
In the carved wooden works, the initial preparation may involve CNC technology to establish the primary structure and composition. Amnon then continues through extensive manual carving, refinement, and surface work. The balance between technological preparation and handwork varies according to the scale, subject, and requirements of each piece.
Epoxy resin is used in selected works as an independent material or in combination with carved wood. Its role differs from one piece to another and may include structural, visual, translucent, or surface-related functions.
The gilding stage is the final and most demanding phase. Metallic leaves, 24 Karat gold, silver, and copper, are applied by hand, sheet by sheet, to the finished surface. The technique is ancient, used for centuries to adorn relics, altarpieces, and sacred objects. In Amnon's work it serves the same purpose: to signal that what you are looking at is not ordinary.
Most works begin with a close study of a well-known artwork or engraving. Amnon develops a personal interpretation through material, technique, scale, composition, and surface treatment.
The composition, scale, and proportions are prepared for production. In carved wooden works, this stage may include CNC-assisted preparation before the manual carving process begins.
Following the initial preparation, Amnon performs extensive manual carving and refinement, developing the surfaces, forms, and details of the work.
In works that include cast-epoxy, the cast elements are produced and integrated according to the specific material and compositional requirements of the piece.
The combined structure is prepared for gilding: smoothed, sealed, and given a base that will hold the metallic leaves.
Gold, silver, and copper leaves are applied by hand, one sheet at a time. A large-scale work can require weeks of gilding alone.
Each completed work is photographed professionally, measured precisely, and documented for the collector’s record.
The Last Supper
The Last Supper
Metallic Version
The Baptism of Jesus
The Baptism of Jesus
Metallic Version
Jesus Falling Beneath the Cross
Metallic Version
